Siłownia

Ideas for a stylish and classy interior


lightweight ceiling coving

Types – from Wikipedia

Astragal ? A semi-circular molding attached to one of a pair of especially fire doors to cover the air gap where the doors meet.
Baguette ? Thin, half-round molding, smaller than an astragal, sometimes carved, and enriched with foliages, pearls, ribbands, laurels, etc. When enriched with ornaments, it was also called chapelet.2
Bandelet ? Any little band or flat molding, which crowns a Doric architrave. It is also called a tenia (from Greek ?????? an article of clothing in the form of a ribbon.2
Baseboard, „base molding” or „skirting board” ? used to conceal the junction of an interior wall and floor, to protect the wall from impacts and to add decorative features. A „speed base” makes use of a base „cap molding” set on top of a plain 1″ thick board, however there are hundreds of baseboard profiles.
Baton ? see Torus
Batten or board and batten ? a symmetrical molding that is placed across a joint where two parallel panels or boards meet
Bead molding ? narrow, half-round convex molding, when repeated forms reeding
Beading or bead ? molding in the form of a row of half spherical beads, larger than pearling
Other forms: Bead and leaf, bead and reel, bead and spindle
Beak ? Small fillet molding left on the edge of a larmier, which forms a canal, and makes a kind of pendant.2 See also: chin-beak
Bed molding ? a narrow molding used at the junction of a wall and ceiling. Bed moldings can be either sprung or plain.

Źródło: https://en.wikipedia.org/wiki/Molding_(decorative)#Types

Plaster – forgotten method of finishing the buildings

Our world today is growing at a tremendous rate, for which many people are not even able to keep up, not to mention getting to know all the news appearing in our lives. Challenge is to become an expert at least a significant part of the areas of life, not to mention all. Take for example the construction industry, which is experiencing a real boom in recent years. Few people are aware of what is stucco, so the method of finishing interior and exterior walls of buildings. In this technique uses a specialized, gypsum plaster kind of carving unique patterns and forms. There’s no denying that this is the kind of finish walls for a bit more demanding people.

Molding and coving – what is it?

Molding, or moulding (Commonwealth), also known as coving (UK, Australia), is a strip of material with various profiles used to cover transitions between surfaces or for decoration. It is traditionally made from solid milled wood or plaster, but may be made from plastic or reformed wood. In classical architecture and sculpture, the molding is often carved in marble or other stones.

A „sprung” molding has bevelled edges that allow mounting between two non-parallel planes (such as a wall and a ceiling), with an open space behind the molding. Other types of molding are referred to as „plain”.

Źródło: https://en.wikipedia.org/wiki/Molding_(decorative)


Tagi: , , , , , ,

Life of an electrical engineer


Need a hand with electric wire? Or perhaps your lights went off? electrician Camden – call us or send a message and we will help you immediately!

Where you can find National Electrical Code

The NEC is available as a bound book containing approximately 1000 pages. It has been available in electronic form since the 1993 edition. Although the code is updated every three years, some jurisdictions do not immediately adopt the new edition.

The NEC is also available as a restricted, digitized coding model that can be read online but not saved, copied and pasted, or printed, free of charge on certain computing platforms that support the restricted viewer software.

In the United States, statutory law cannot be copyrighted and is freely accessible and copyable by anyone. When a standards organization develops a new coding model and it is not yet accepted by any jurisdiction as law, it is still the private property of the standards organization and the reader may be restricted from downloading or printing the text for offline viewing. For that privilege, the coding model must still be purchased as either printed media or a CD-ROM. Once the coding model has been accepted as law, it loses copyright protection and may be freely obtained at no cost.

Archive.org and many state or local government sites allow download of the NEC without the registration that the NFPA requires.

External links to both the restricted NEC online access and free public access sites are referenced at the end of this article.

Źródło: https://en.wikipedia.org/wiki/National_Electrical_Code

Electrician industry

Large industrial plants require continuous supervision by electricians. In such places, electrical work, after-hour, including the usually public holidays and so on. Often continuity of production makes the conduct of such processes is profitable. Production plants are often places where electricity specialist can find a well-paid job. This involves a number of responsibilities for the most number of installations. Moreover, work in the industry can find a lot of people, because the large volume production is accompanied by high employment, also in the field of electrical engineering.

Electronics and cars

Electrical services are increasingly concerned electricity car. As it turns out, more and more modern cars are even drugged technical solutions in the field of electrical and electronics and even a minor fault causes that need to enlist the help of a specialist in this field. Different types of probes and controls in cars are very important indicators that allow the user to monitor the level of a suitable fluid and the overall control of the car. In case of failure may occur up to a serious fault, because electrical services increasingly possible to repair in this area.


Weterynarz w pracy


Zwierze może potrzebować weterynarza w najmniej spodziewanym momencie, sprawna pomoc może być potrzebna. Warto więc wiedzieć gdzie jest weterynarz radom 24h, by móc tam się udać. O weterynarzach.

Specjalista w leczeniu konkretnych zwierząt

Specjaliści od konkretnych typów zwierząt są bardzo pożądani, a właściciele takich pupili są w stanie przejechać pół Polski, aby zawieźć swojego zwierzaka do najlepszego specjalisty. Niestety nie każdy weterynarz dobrze wyleczy świnkę morską, czy legwana. Trafiając na złego specjalistę możemy bardziej zwierzęciu zaszkodzić niż pomóc, ponieważ niewiedza danego weterynarza o konkretnym gatunku będzie niewystarczająca.

Dlatego też jeżeli dana przychodnia ma jakiegoś dobrego specjalistę od powiedzmy ptaków egzotycznych, chwali się tym, aby ludzie wiedzieli, gdzie mają iść ze swoją chorą papugą, będąc pewni, że otrzymają profesjonalna pomoc.

Wzrost zapotrzebowania na weterynarzy

Przychodni weterynaryjnych jest coraz więcej, w sumie nikt nie powinien się dziwić, ponieważ i zwierząt domowych przybywa, a świadomość i odpowiedzialność ludzi rośnie. Przekłada się to na ilość ludzie, którzy dbają o swoje zwierzęta i regularnie uczęszczają do weterynarza. więc i zapotrzebowanie jest większe.

W dobrych przychodniach weterynaryjnych ciężko jest o pustą poczekalnię, a w większych miastach kolejka bardzo przypomina tą w przychodniach dla ludzi. Głównie pacjenci to dalej psy i koty, jednak można zauważyć, ze coraz więcej pojawia się zwierząt mniejszych, a nawet egzotycznych.

Zadania lekarza weterynarii w Wikipedii

Do uprawnień lekarza weterynarii należy:

badanie stanu zdrowia zwierząt
rozpoznawanie, zapobieganie i zwalczanie chorób zwierząt
leczenie zwierząt
udzielanie porad i konsultacji
pielęgnacja zwierząt
wydawanie opinii i orzeczeń
wykonywanie czynności związanych z określeniem zdolności rozrodczych zwierząt i ich zaburzeń oraz biotechniką rozrodu
wykonywanie detalicznego obrotu produktami leczniczymi weterynaryjnymi, paszami leczniczymi oraz wyrobami medycznymi przeznaczonymi dla zwierząt, na zasadach określonych w odrębnych przepisach
wypisywanie recept lekarskich na leki gotowe, apteczne czy też leki recepturowe przeznaczone dla zwierząt
wykonywanie badań laboratoryjnych i innych badań diagnostycznych
usypianie zwierząt, jeśli uzna, że choroba, na którą te cierpi jest nieuleczalna, bądź uleczenie jej będzie dla zwierzęcia zbyt dużym cierpieniem.

Źródło: https://pl.wikipedia.org/wiki/Lekarz_weterynarii


Temat dla facetów – mechanika samochodowa


Czujnik ciśnienia płynu wspomagania

Jak poradzić sobie z awarią auta?

Każdy lubi poruszać się własnym autem. Daje nam tą większą swobodę i niezależność, ale żeby móc to robić, samochód musi być całkowicie sprawny i bezpieczny. W każdym aucie mogą pojawić się mniejsze lub większe awarie i należy w takim przypadku odpowiednio zareagować. Jeśli nie posiadamy odpowiedniej wiedzy, nie powinniśmy podejmować się samodzielnych napraw, ponieważ często jedynie pogarsza to sytuację. W takim przypadku należy udać się do warsztatu lub zamówić pomoc drogową, która postara się naprawić usterkę na miejscu lub zapewni nam transport samochodu do najbliższego zakładu mechanicznego. Takich sytuacji nie wolno lekceważyć, ponieważ mogą one generować spore koszty i problemy.

Wizyty w warsztacie samochodowym

Nie każdy z nas miał okazję przynajmniej raz odwiedzić warsztat samochodowy, a miejsce to znają doskonale osoby, które cieszą się posiadaniem własnych pojazdów. Taki specjalistyczny zakład to miejsce, do którego możemy udać się, jeśli w naszym samochodzie pojawiła się usterka lub gdy wymaga on przeglądu. W dziedzinie mechaniki samochodowej zawiera się wiele czynności i konieczna jest tutaj specjalistyczna wiedza z zakresu budowy oraz eksploatacji samochodów. Nie każdy może zostać mechanikiem samochodowym i nie każdy będzie dobrze się sprawdzał w tym fachu, więc wybierając odpowiedni warsztat, powinniśmy dokładnie się zastanowić. Tylko najlepsi specjaliści zapewnią nam fachową pomoc.

Czym zajmuje się mechanik samochodowy?

Na rynku znajdziemy obecnie wielu specjalistów, którzy pomagają nam dokonywać drobnych napraw w domu lub zajmują się naszym zdrowiem. W każdej dziedzinie spotkać możemy konkretnych fachowców, a jeśli chodzi o nasze samochody i ich naprawy, odpowiedzialnymi za to osobami są mechanicy samochodowi. To właśnie oni przeprowadzają przeglądy aut oraz ich naprawy, a także mogą przekazać nam zalecenia, które wpłyną na dłuższą żywotność naszego pojazdu. Warto od czasu do czasu korzystać z ich usług, ponieważ nie każdą usterkę będziemy mogli naprawić samodzielnie. Fachowa pomoc sprawi, że nasze auto będzie sprawne o wiele dłużej i pozwoli nam uniknąć problemów, więc nie warto jej unikać.


Poligrafia drukowana


Rzeczy typu naklejki drukowane cyfrowo to nic innego jak efekt pracy zakładu drukarskiego, firmy te oferują drukowanie w niskich cenach i coraz lepszej jakości. O druku.

Wikipedia: Właściwości farby drukarskiej

Właściwości drukowe
Właściwości farby decydujące o zachowaniu się farby podczas druku:

właściwe zdyspergowanie pigmentów/lak w spoiwie
lepkość farby, której miarą dla farb ciekłych jest prędkość wypływu z kubków wypływowych a dla farb pozostałych ? wskazania wiskozymetru
tiksotropia farby, czyli odwracalny proces przechodzenia z postaci żelu w postać płynnego zolu pod wpływem wstrząsów
tack farby, czyli podatność na rozwarstwianie farby istotna przy transferze farby z jednego elementu maszyny drukującej na drugi, a na podłożu drukowym skończywszy ? wielkość tacku mierzona jest tackometrami
plastyczność farby
napięcie powierzchniowe farby
Właściwości użytkoweedytuj | edytuj kod
Właściwości farby po jej utrwaleniu się na drukowanej powierzchni:

właściwości optyczne: gęstość optyczna, barwa, połysk, krycie itd.
właściwości odpornościowe: ścieralność farby, odporność na światło, niską/wysoką temperaturę, środki chemiczne (w tym zawarte w lakierach)
właściwości sensoryczne ? wpływ farby na smak i zapach, mierzony na przykład testem Robinson

Źródło: https://pl.wikipedia.org/wiki/Farba_drukarska

Czym jest czcionka?

Czcionka ma postać metalowego prostopadłościanu odlanego ze stopu drukarskiego. Główną część czcionki stanowi słupek. Na jego górnej (czołowej) powierzchni znajduje się wystająca główka o kształcie drukowanego znaku. Płaska powierzchnia główki stanowi tzw. oczko odbijające w trakcie drukowania znaki pisarskie. Oczko to powierzchnia samego znaku. Prostokąt opisany na obrysie główki nie wypełnia jednak całości powierzchni czołowej czcionki. Pomiędzy główką i krawędziami bocznymi czcionki znajdują się odległości zwane odsadkami. Odsadka umożliwia składanie samego tekstu bez justunku, zapewniając minimalny potrzebny odstęp między znakami w wierszu (w poziomie) i między wierszami (w pionie).

Źródło: https://pl.wikipedia.org/wiki/Czcionka

O etykiecie

Oznakowanie produktów to podstawa identyfikacji marki i powiązania jej z danym produktem. Dlatego właśnie firmy produkcyjne zamieszczają na swoich etykietach znaki firmowe zaraz obok nazwy samego produktu. Ma to duże znaczenie odbioru marki przez klienta, jak również ogólnego wrażenia jakie dana firma wywiera na szeroko rozumiany rynek konsumencki.

Dlatego właśnie ważny jest projekt i samo wykonanie takiej etykiety, czy naklejki na produkcie. Jest wiele zakładów poligraficznych, jednak nie każdy ma w swojej ofercie dobre jakościowo produkty typu etykiety samoprzylepne. Warto pomyśleć o zainwestowaniu w takie etykiety, ponieważ to w zasadzie podstawa dla każdego produktu.


Tagi: , , , , ,

Article about pipes issues


plumber Chelsea

temperature control

Sometimes we notice that arose in our house a problem with water pressure. At too low water pressure it flows from the tap a little trickle and practically we are not able to use it. However, at too high pressure water can even damage the hose leading it, for example, the washing machine and help to create failure of the entire device. It can also cause the hose pops out with security and water will flood our bathroom. Therefore, such a problem immediately turn to a plumber. Another problem associated with the use of water in the home can be adjust the temperature when the tap is flying too hot or cold water constantly. You may then find that the repair will require owned by us boiler. Sometimes you will even replace the boiler with a new one.

Materials for plumbing

Water systems of ancient times relied on gravity for the supply of water, using pipes or channels usually made of clay, lead, bamboo, wood, or stone. Hollowed wooden logs wrapped in steel banding were used for plumbing pipes, particularly water mains. Logs were used for water distribution in England close to 500 years ago. US cities began using hollowed logs in the late 1700s through the 1800s.8 Today, most plumbing supply pipe is made out of steel, copper, and plastic; most waste (also known as „soil”) out of steel, copper, plastic, and cast iron.

The straight sections of plumbing systems are called „pipes” or „tubes”. A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.

Źródło: https://en.wikipedia.org/wiki/Plumbing#Materials

About plastic pipes

Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey substances which can flow ? liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.

There are three basic types of plastic pipes:

Solid wall pipe
Extruded pipes consisting of one layer of a homogeneous matrix of thermoplastic material which is ready for use in a pipeline

Structured wall pipe
Structured-wall pipes and fittings are products which have an optimized design with regard to material usage to achieve the physical, mechanical and performance requirements. Structured Wall Pipes are tailor made solutions of piping systems, for a variety of applications and in most cases developed in cooperation with users

Barrier pipe
Pipe incorporating a flexible metallic layer as the middle of three bonded layers. Barrier pipe is used, for example, to provide additional protection for the contents passing through the pipe (particularly drinking water) from aggressive chemicals or other pollution when laid in ground contaminated by previous use.

Most plastic pipe systems are made from thermoplastic materials. The production method involves melting the material, shaping and then cooling. Pipes are normally produced by extrusion.

Źródło: https://en.wikipedia.org/wiki/Plastic_pipe


Medieval city in Poland – about Cracow


cracow poland travel

Worth to visit

Kraków’s historic centre, which includes the Old Town, Kazimierz and the Wawel Castle, was included as the first of its kind on the list of UNESCO World Heritage Sites in 1978.72 The Stare Miasto is the most prominent example of an old town in the country.73 For many centuries Kraków was the royal capital of Poland, until Sigismund III Vasa relocated the court to Warsaw in 1596. The whole district is bisected by the Royal Road, the coronation route traversed by the Kings of Poland. The Route begins at St. Florian’s Church outside the northern flank of the old city-walls in the medieval suburb of Kleparz; passes the Barbican of Kraków (Barbakan) built in 1499, and enters Stare Miasto through the Florian Gate. It leads down Floriańska Street through the Main Square, and up Grodzka to Wawel, the former seat of Polish royalty, overlooking the Vistula river. Old Town attracts visitors from all over the World. Kraków historic centre is one of the 13 places in Poland that are included in the UNESCO World Heritage Sites. The architectural design of the district had survived all cataclysms of the past and retained its original form coming from the medieval times. The Old Town of Kraków is home to about six thousand historic sites and more than two million works of art.74 Its rich variety of heritage architecture includes Gothic, Renaissance and Baroque buildings. Kraków’s palaces, churches, theatres and mansions display great variety of color, architectural details, stained glass, paintings, sculptures, and furnishings.

Źródło: https://en.wikipedia.org/wiki/Krak%C3%B3w#Cityscape

Postcards from Cracow

Each of the tourists who visits a city, he would like to have some memento of their trip, held. Therefore, in Krakow there is no shortage of different stalls and souvenir outlets. You can also buy postcards of Krakow, which are sent from the city to family and friends, and can be pasted into a family album, where the custom documentation for family outings reigns in our family. In Krakow, as in any other tourist city, you can also take pictures. We only have to remember not to remove the camera in locations where taking pictures is prohibited. Currently, very often curly films documenting the visits to various places of historic buildings.

History of Cracow after 1918

After the war, under the Polish People’s Republic, the intellectual and academic community of Kraków was put under total political control. The universities were soon deprived of printing rights and autonomy.63 The Stalinist government ordered the construction of the country’s largest steel mill in the newly created suburb of Nowa Huta.64 The creation of the giant Lenin Steelworks (now Sendzimir Steelworks owned by Mittal) sealed Kraków’s transformation from a university city to an industrial centre.65 The new working class, drawn by the industrialisation of Kraków, contributed to rapid population growth.

In an effort that spanned two decades, Karol Wojtyła, cardinal archbishop of Kraków, successfully lobbied for permission to build the first churches in the new industrial suburbs.6566 In 1978, Wojtyła was elevated to the papacy as John Paul II, the first non-Italian pope in 455 years. In the same year, UNESCO placed Kraków Old Town on the first-ever list of World Heritage Sites.

Źródło: https://en.wikipedia.org/wiki/Krak%C3%B3w#History


Tagi: , , , , , , , , ,

Bathtubs and plumbing issues


boiler service Harrow

Is it worth it to repair a broken pipe yourself?

Self-repair is a way to get rid of the fault, which is used by many of us. Often it can be done very easily, but if they relate to the hydraulics, better be careful. It is not easy to replace a broken pipe or repair the faulty seal, because in this case a better choice would call good service hydraulic, who will do everything professional and efficient. Such companies can now find almost everywhere, so instead undertake to repair the personal risk and higher costs, it is better to entrust this task good art. It is they who fix everything as it should, without causing additional problems.

Bathing history

Documented early plumbing systems for bathing go back as far as around 3300 BC with the discovery of copper water pipes beneath a palace in the Indus Valley Civilization of ancient India; see sanitation of the Indus Valley Civilization. Evidence of the earliest surviving personal sized bath tub was found on the Isle of Crete where a 1.5-metre (5 ft) long pedestal tub was found built from hardened pottery.

The clawfoot tub, which reached the apex of its popularity in the late 19th century; had its origins in the mid 18th century, where the ball and claw design originated in Holland, possibly artistically inspired by the Chinese motif of a dragon holding a precious stone. The design spread to England where it found much popularity among the aristocracy, just as bathing was becoming increasingly fashionable. Early bathtubs in England tended to be made of cast iron, or even tin and copper with a face of paint applied that tended to peel with time.1

The Scottish-born inventor David Buick invented a process for bonding porcelain enamel to cast iron in the 1880s while working for the Alexander Manufacturing Company in Detroit. The company, as well as others including Kohler Company and J. L. Mott Iron Works, began successfully marketing porcelain enameled cast-iron bathtubs, a process that remains broadly the same to this day. Far from the ornate feet and luxury most associated with clawfoot tubs, an early Kohler example was advertised as a „horse trough/hog scalder, when furnished with four legs will serve as a bathtub.” The item’s use as hog scalder was considered a more important marketing point than its ability to function as a bathtub.1

In the latter half of the 20th century, the once popular clawfoot tub morphed into a built-in tub with a small apron front. This enclosed style afforded easier maintenance and, with the emergence of colored sanitary ware, more design options for the homeowner. The Crane Company introduced colored bathroom fixtures to the US market in 1928,citation needed and slowly this influx of design options and easier cleaning and care led to the near demise of clawfoot-style tubs.

Źródło: https://en.wikipedia.org/wiki/Bathtub#History_of_bathtubs_and_bathing

Replacing the tub bathroom on the new

After some time the use of the bath can choose to replace it. The reason for such a decision may be pouring the water out of the tub while taking a bath, which may indicate that the bath does not have a good run-off. But the replacement of the bath may be caused by the desire to be placed in the bathroom of a new sanitary facilities, which will look more modern and well-maintained. To be able to replace the bath with a new, employed by us plumber will have to weld the plate, in which the tub is built, and then remove the old tub from the bathroom. Installation of a new bathroom bathtub may be combined with replacement pipes for water from the tub so that it will serve us to reliably for many years.


Engineering – electricity and cars


Contact us, your trusty electrician, in case of emergency, we can help you with everything electrical – electrician Merton

Specialty car mechanic

Very often we meet with automotive workshops that offer electrical services. They belong to the same frequently used services, such as services varnishing or mechanics. As you know, a major failure associated with electricity in the car can lead to significant deficiencies and prevent the smooth functioning of the car. Therefore, many people use the services of electricians employed in garages. You could say that as a specialty electrician person working in the garage is very much needed, because the newer the car, the more it solutions for electrical and electronics, and you need a particular specialist, to effectively remove the fault.

How it works?

Electric power is transformed to other forms of energy when electric charges move through an electric potential (voltage) difference, which occurs in electrical components in electric circuits. From the standpoint of electric power, components in an electric circuit can be divided into two categories:

Passive devices or loads: When electric charges move through a potential difference from a higher to a lower voltage, that is when conventional current (positive charge) moves from the positive (+) terminal to the negative (?) terminal, work is done by the charges on the device. The potential energy of the charges due to the voltage between the terminals is converted to kinetic energy in the device. These devices are called passive components or loads; they ‚consume’ electric power from the circuit, converting it to other forms of energy such as mechanical work, heat, light, etc. Examples are electrical appliances, such as light bulbs, electric motors, and electric heaters. In alternating current (AC) circuits the direction of the voltage periodically reverses, but the current always flows from the higher potential to the lower potential side.

Active devices or power sources: If the charges are moved by an ‚exterior force’ through the device in the direction from the lower electric potential to the higher, (so positive charge moves from the negative to the positive terminal), work will be done on the charges, and energy is being converted to electric potential energy from some other type of energy, such as mechanical energy or chemical energy. Devices in which this occurs are called active devices or power sources; such as electric generators and batteries.
Some devices can be either a source or a load, depending on the voltage and current through them. For example, a rechargeable battery acts as a source when it provides power to a circuit, but as a load when it is connected to a battery charger and is being recharged.

Źródło: https://en.wikipedia.org/wiki/Electric_power#Explanation

Electric system, Wkipedia:

An electric power system is a network of electrical components used to supply, transfer and use electric power. An example of an electric power system is the network that supplies a region’s homes and industry with power?for sizable regions, this power system is known as the grid and can be broadly divided into the generators that supply the power, the transmission system that carries the power from the generating centres to the load centres and the distribution system that feeds the power to nearby homes and industries. Smaller power systems are also found in industry, hospitals, commercial buildings and homes. The majority of these systems rely upon three-phase AC power?the standard for large-scale power transmission and distribution across the modern world. Specialised power systems that do not always rely upon three-phase AC power are found in aircraft, electric rail systems, ocean liners and automobiles.

Źródło: https://en.wikipedia.org/wiki/Electric_power_system


Look up! About ceiling decorations


ceiling cornice london

Molding – definition

Molding, or moulding (Commonwealth), also known as coving (UK, Australia), is a strip of material with various profiles used to cover transitions between surfaces or for decoration. It is traditionally made from solid milled wood or plaster, but may be made from plastic or reformed wood. In classical architecture and sculpture, the molding is often carved in marble or other stones.

A „sprung” molding has bevelled edges that allow mounting between two non-parallel planes (such as a wall and a ceiling), with an open space behind the molding. Other types of molding are referred to as „plain”.

Źródło: https://en.wikipedia.org/wiki/Molding_(decorative)

Molding types – Wikipedia:

Astragal ? A semi-circular molding attached to one of a pair of especially fire doors to cover the air gap where the doors meet.
Baguette ? Thin, half-round molding, smaller than an astragal, sometimes carved, and enriched with foliages, pearls, ribbands, laurels, etc. When enriched with ornaments, it was also called chapelet.2
Bandelet ? Any little band or flat molding, which crowns a Doric architrave. It is also called a tenia (from Greek ?????? an article of clothing in the form of a ribbon.2
Baseboard, „base molding” or „skirting board” ? used to conceal the junction of an interior wall and floor, to protect the wall from impacts and to add decorative features. A „speed base” makes use of a base „cap molding” set on top of a plain 1″ thick board, however there are hundreds of baseboard profiles.
Baton ? see Torus
Batten or board and batten ? a symmetrical molding that is placed across a joint where two parallel panels or boards meet
Bead molding ? narrow, half-round convex molding, when repeated forms reeding
Beading or bead ? molding in the form of a row of half spherical beads, larger than pearling
Other forms: Bead and leaf, bead and reel, bead and spindle
Beak ? Small fillet molding left on the edge of a larmier, which forms a canal, and makes a kind of pendant.2 See also: chin-beak
Bed molding ? a narrow molding used at the junction of a wall and ceiling. Bed moldings can be either sprung or plain.

Źródło: https://en.wikipedia.org/wiki/Molding_(decorative)#Types

Original interior design

There’s no denying that nowadays increasingly counts originality in every aspect. We make every effort to ensure that, to dress in a manner unprecedented in outlining his own style. It is no different in the case of arranging the spaces in which we live. Human nature is such, and not another, that we want to surprise our guests. Plaster is quite original and even extravagant technique for finishing the exterior walls and the interior, which has its roots in ancient times. It is characteristic of the buildings from that period, so the use of this method in your case warrants the originality of living space. Without much of a problem in every city we should find even one of ordinary skill in this field.


Tagi: , , , , , ,